epdm coatings




Application of Liquid Rubber

Follow epdmcoatings on Twitter


Coverage 250 sq ft (available in 5 gallon pails only).............

Order Here Cost is $137.50/Pail.

EnergyGuardT Acrylic Rust Prevention Primer
elastomeric paint

DESCRIPTION

EnergyGuard Acrylic Coating is a high solids, acrylic elastomeric coating for all types of roofs.

USES
Asphalt Roofs, Built Up Roofs (BUR), Concrete Roofs, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam Roofs, Single Ply Roofs and Wood.

FEATURES
Provides a seamless, durable membrane. Superior adhesion to various substrates. Contains fungicides and mildewcides. Excellent UV protection for polyurethane foam. Heat reflective coating helps reduce cooling costs. Reflects the sun's UV-rays and prevents premature degradation. Prevents premature roof failure by controlling thermal cycling. Easy to use, non-toxic and VOC compliant water based coating.

PACKAGING
5 gallon buckets, 55 gallon drums.

PREPARATION

All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.

APPLICATION
EnergyGuard Acrylic Roof Coating is ready to use. Thinning is not recommended. Containers
should not be left open for extended periods of time.

Follow our roof restoration procedures and always perform a coating adhesion test before doing
the entire roof.

Spray: Airless Sprayer, 1gpm, 3,000 psi, .025 or .031 tip.
Brush: Good quality synthetic bristle brush.
Roller: Short nap roller.

Clean Up: Water

Caution: EnergyGuard Acrylic Roof Coating is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Coatings must be completely dry before exposing to water or foot traffic. Keep containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

© Copyright 2009 EPDM Coatings LLC. All Rights Reserved.
Address For RMA Contractors Only P.O Box 3429 Wernersville PA 19609
EPDM Coatings N.E Sales Office 494 Bridgeport Ave Suite 101, PMB 342 Shelton CT 06484-4748
Liquid Rubber |Liquid Roof | Legal/Privacy/Return Policy | EMAIL US | ADVERTISE WITH US | Affiliate links | Site Map